Find where to buy products from suppliers in NZ, including: distributors, manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in Australia, UK or the USA.
| Product | Description | |
|---|---|---|
| AHA Fruit Acid | AHA fruit acids give the skin an immediate boost. Wrinkle Reduction. Instant Hydration. Skin Resurfacing. Chemical Exfoliation. Natural Glow. Deep Cleanse. Microbiome Support. AHA fruit acid is a concentrated blend of five standardised botanical extracts: bilberry, sugar cane, sugar maple, orange, and lemon. These extracts contain several naturally occurring alpha hydroxy acids. As a guide the material contains the following concentrations of alpha hydroxy acids: Lactic Acid 28-32%. Glycolic Acid 12-17%. Citric Acid 2-6%. Malic Acid 1% max. Tartaric Acid 1% max. Alpha hydroxy acids have been shown to promote smoother, younger looking skin by increasing the rate of cell renewal. Group: Active ingredients. Alternative Names: Aqua, Vaccinium Myrtillus Fruit Extract, Saccharum Officinarum Extract, Citrus Aurantium Dulcis Fruit Extract, Citrus Limon Fruit Extract, Acer Saccharum Sap Extract. CAS No. 7732-18-5, 84082-34-8, 91722-22-4, 8028-48-6, 84929-31-7, 91770-22-8. Pack Sizes: 100g, 500g, 1Kg, 5Kg, 20Kg, and above upon request. Product ID: RMAAAHAFRUIACID. EINECS: 231-791-2, 281-983-5, 294-424-5, 232-433-8, 284-515-8, 294-807-7. |  Worldwide |
| Aloe Vera [200:1] Powder - Fruit & Herbal Powder Extracts | This is a 200:1 powdered aloe which means that to re-constitute it so that it is a single strength Aloe Liquid you need to add only 0.5g of Aloe Powder to 99.5g of Water (0.5% to 99.5%). The Aloe Powder will completely dissolve into water but will not form a gel. This is because the pulverising and powder processing breaks up the complex sugar chains into smaller chain lengths that can no longer form a gel. This does not impact in the performance of the Aloe in your product though as the minerals and moisturising properties remain. To thicken your Aloe Water we recommend adding something like Xanthan Gum, Carrageenan, Hydroxyethyl Cellulose or Carbomer. These thickeners will swell in water to form a gel-like base that can then be used as a facial serum base or just as a soothing Aloe Gel. Otherwise we do sell a ready-made aloe gel. In addition to thickning the Aloe Water the water will also need preserving. We have a range of preservatives available to suit a wide range of ingredient philosophies and product asperations. Group: Extracts. Alternative Names: Aloe Barbadensis Leaf Juice Powder, Aqua. CAS No. 85507-69-3, 7732-18-5. Pack Sizes: 15g, 100g, 500g, 1Kg, 5Kg, 20Kg, and above upon request. Product ID: EXTRALVERPOW. EINECS: 287-390-8, 231-791-2. | Worldwide |
| Ammonium Lauryl Sulphate | Ammonium Lauryl Sulphate is often used as a primary (main) surfactant in high foaming, cost effective bubble baths, cleansers and shampoos. Being highly effective it is also used in household cleaning solutions where grease and dirt removal is paramount. Activity Level: 30%. Group: Surfactants. Alternative Names: Aqua, Ammonium Lauryl Sulfate, Methylchloroisothiazolinone, Methylisothiazolinone. CAS No. 7732-18-5, 2235-54-3,26172-55-4,2682-20-4. Pack Sizes: 100ml, 500g, 1Kg, 5Kg, 20Kg, and above upon request. Product ID: RMASAMMOCOCY. EINECS: 231-791-2, 218-793-9,247-500-7,220-239-6. | Worldwide |
| Cetrimonium Chloride 25% | Description: Cetrimonium Chloride 25% Active. INCI: Cetrimonium Chloride. Solubility: Water Soluble. Benefits: Great Anti-Static active to reduce fly-away and improve the manageability of the hair. It also helps with wet combability. Origin: Synthetic. Group: Surfactants. Alternative Names: Aqua, Cetrimonium Chloride. CAS No. 7732-18-5, 112-02-7. Pack Sizes: 100g, 500g, 1Kg; 5Lt, 20Lt, and above upon request. Product ID: RMCSCETRCHLO25. EINECS: 231-791-2, 203-928-6. | Worldwide |
| Corn Starch | Information: Corn Starch is the starchy part of the maize (corn) grain and is put to use in cosmetics as a thickener in emulsion based products, an absorbing agent for oils in dry shampoos, and a feel modifier. Physical Form: Fine Powder (non nano). Application: Use between 0.2-2% in your finished creams or lotions to help absorb excess grease on the skin, to mattify the texture, to help reduce product stickiness or to give a slightly silky feel to the end product. Group: Active ingredients. Alternative Names: Zea Mays Starch, Aqua. CAS No. 9005-25-8, 7732-18-5. Pack Sizes: 1Kg, 5Kg, 20Kg, and above upon request. Product ID: RMAACORNSTAR. EINECS: 232-679-6, 231-791-2. | Worldwide |
| Emulsifying Wax Vegetable | This easy-to-use emulsifying wax is derived from plant-based alcohols and sugars. It is typically used to help form oil-in-water emulsions such as lotions, creams, foundations, creamy face and body masks and other emulsified products. Material Origin : It is derived from sustainable palm source, wheat and corn. Appearance: Pastilles or Flakes. Group: Emulsifiers. Alternative Names: Cetearyl Alcohol, Cetearyl Glucoside, Aqua. CAS No. 67762-27-0, 246159-33-1, 7732-18-5. Pack Sizes: 100g, 500g, 1Kg, 5Kg, 20Kg, and above upon request. Product ID: RMSWCETEGLUC. EINECS: 267-008-6, 928-659-8, 231-791-2. | Worldwide |
| Epitensive® | Re-wind the skin to a more youthful and resilient complexion. Regenerative Peptide with natural origin. Often peptides are manufactured using bacterial synthesis but this one is different. It is produced using the plant model, N. Benthamiana, an Australian native nicotine plant that provides the environment for this peptide to be synthesised. Nicotinana grows across Western Australia, The Northern Territory and into Queensland and its lack of immune system makes this a perfect plant model for peptide synthesis. Ingredient Action: Reduce roughness, improve elasticity and reduce wrinkle volume. Turn back the visible signs of ageing! Group: Active ingredients. Alternative Names: Nicotiana Benthamiana Hexapeptide-40 sh-Oligopeptide-1. CAS No. 107-88-0, 7732-18-5, 62229-50-9 [ECHA]. Pack Sizes: 17g, 100g, 500g, 1Kg, and above upon request. Product ID: RMAAEPITESIV. EINECS: 203-529-7, 231-791-2, 263-468-7. | Worldwide |
| Glyceryl Stearate & PEG100 Stearate | A self emulsifying wax, from Palm Oil, that imparts emolliency and a creamy look and feel to skin creams, lotions and milks. Group: Emulsifiers. Alternative Names: Glyceryl Stearate, PEG-100 Stearate, Glycerin, Aqua. CAS No. 31566-31-1, 9004-99-3, 56-81-5, 7732-18-5. Pack Sizes: 100g, 500g, 1Kg, 5Kg, 20Kg, and above upon request. Product ID: RMSWGLYCSTEA. EINECS: 250-705-4, 618-405-1, 200-289-5, 231-791-2. | Worldwide |
| Green French Argile Clay | Argile is a trademark associated with superfine, soft French clay. When using Superfine French Green Clay add purified water, or floral water, mix into a paste and apply to the face or body. Allow to dry, rinse it off, and use your favorite moisturizer to finish. We recommend that you also try adding your preference of essential oils or dried herbs to compliment the mix. This is a non-swelling clay. Usage levels: 5 - 40% in masks. Blend into the product when cool. Homogenisation is recommended. Group: Clays. Alternative Names: Illite, Kaolin, Argilla, Aqua. CAS No. 12173-60-3 [PCPC; CosIng], 68476-25-5 [AICIS], 1332-58-7, 12199-37-0, 7732-18-5. Pack Sizes: 100g, 500g, 1Kg, 5Kg, 25Kg, and above upon request. Product ID: CLAYGREE. EINECS: 601-803-4, 310-194-1, 235-374-6, 231-791-2. | Worldwide |
| Hyaluronic Acid 1% Liquid | Hyaluronic Acid occurs naturally in the body and generally decreases with age. In the skin it exists in the epidermis and keeps the skin hydrated and supple due to its high water retention ability. As we age our production naturally decreases and we begin to notice alterations in our skin such as wrinkling or dry skin. A product containing Hyaluronic Acid would be beneficial for mature or dry skin to help restore smoothness and elasticity of the skin. Please note that there are two main sources of Hyaluronic acid the first being animal extracted (from Rooster Combs typically) and the second being bacterial fermentation. Our material is from bacterial fermentation using glucose that is corn derived to create the hyaluronic acid in a biofermentation process. The product is still classified as natural and used in natural and organic cosmetic manufacturing. Group: Active ingredients. Alternative Names: Aqua, Sodium Hyaluronate, Phenoxyethanol, Ethylhexylglycerin. CAS No. 7732-18-5, 9067-32-7, 122-99-6, 70445-33-9. Pack Sizes: 100ml, 500ml, 1Kg, 5Kg, 20Kg, and above upon request. Product ID: RMAASODIHYAL. EINECS: 231-791-2, 618-620-0, 204-589-7, 408-080-2. | Worldwide |
| Hylamesh 4D | This ingredient delivers a four-dimensional hyaluronic network to the skin, combining the penetration power of low molecular weight hyaluronic acid with the superior water-binding capacity of the ultra-high molecular weight polymer. This efficient moisturising delivery system is then stabilised in a cross-polymer hyaluronic gel network which protects the skin from moisture loss and pollutants. Composition: Sodium Hyaluronate crosspolymer (Weight not available), Sodium Hyaluronate (1.5-2.2 M Da), Sodium Acetylated Hyaluronate (30-100K Da), Hydrolyzed Sodium Hyaluronate (5-10K Da), Pentylene Glycol, Ethylhexylglycerin, Aqua. Performance: Efficacy data carried out by the manufacturer shows a 16% reduction in trans-epidermal water loss was still achieved up to 8 hours after the application of a lotion containing this ingredient. By comparrison, the same base containing hyaluronic acid as the active recorded TEW levels at the same rate as a placebo lotion. Group: Active ingredients. CAS No. 105524-32-1. 9067-32-7. 287390-12-9. Not Allocated. 5343-92-0. 70445-33-9. 7732-18-5. Pack Sizes: 17g, 100g, 500g, 1Kg, 5Kg, and above upong request. Product ID: RMAAHYMAGIC4D. EINECS: Not Allocated. 618-620-0. Not allocated. Not allocated. 226-285-3. 408-080-2. 231-791-2. | Worldwide |
| Kaolin White Australian Clay | Kaolin is a widely used clay for cosmetic purposes. It won't swell or thicken in water like bentonite clay does so it does require suspending in a water-based product using either a thickening gel agent or an emulsifier. Kaolin is commonly used as the base for clay masks where it provides good coverage and drying capacity. It it common to use Kaolin as a base clay and then add specialist, more active clays over the top of this to provide the activity. Use Levels: 0.5-50% Typically but can be applied to the skin in any concentration once wetted. Group: Clays. Alternative Names: Kaolin, Aqua. CAS No. 1332-58-7, 7732-18-5. Pack Sizes: 100g, 500g, 1Kg, 5Kg, 20Kg, and above upon request. Product ID: CLAYKAOLWHIT. EINECS: 310-194-1, 231-791-2. | Worldwide |
| Kaolin White Clay | Kaolin is a naturally occuring mineral that is water-washed and centrifuged to remove impurities. Kaolin is used in a wide range of cosmetics including in foundations and BB creams for coverage, in face masks as the main clay component, in wash products as a cleansing actives, in deodorants as an absorbent element and in hand creams for a dry feel and in other colour cosmetics as a binder/ colour base. Solubility: Water Dispersible, this isn't soluble. pH of a 30% Solution: 4-5.5. Average Particle size: 2-3 microns (non-nano). Group: Clays. Alternative Names: Kaolin, Aqua. CAS No. 1332-58-7, 7732-18-5. Pack Sizes: 100g, 500g, 1Kg, 5Kg, 25Kg, and above upon request. Product ID: CLAYKAOLIWHT. EINECS: 310-194-1, 231-791-2. | Worldwide |
| Pink Australian Clay | Pink Australian Clay has a lower iron content than the red clay hence the lighter colour. This essential minerals to help replenish and regenerate the epidermis of the skin to create softened and conditioned skin with a healthy glow. The clay can be blended with other clays for different properties and effect or used as a stand-alone additive for face and body masks. To form a paste, mix approximately a teaspoon of Pink Australian Clay with 1/3 tsp of water to form a paste. Mix until colour is unform. Group: Clays. Alternative Names: Kaolin, Aqua, CI 77491, CI 77499. CAS No. 1332-58-7, 7732-18-5, 1309-37-1, 12227-89-3. Pack Sizes: 100g, 500g, 1Kg, 5Kg, 20Kg, and above upon request. Product ID: CLAYAUSTPINK. EINECS: 310-194-1, 231-791-2, 215-168-2, 235-442-5. | Worldwide |
| Plantaserv C | This preservative is chemically similar to our Plantaserv D but it has been produced using a slightly different process which allows it to be used in some certified organic formulations unlike the Plantaserv D. The certifying bodies that have approved this preservative are the OFC, COSMOS and Ecocert. Origin: Plant based. Heat Stability: Relatively good can be added into your product at temperatures up to 80C. Dose Rate: 4% is the maximum amount that can be used. 3-4% is a typical addition rate. Group: Preservatives. Alternative Names: Glycerin, Aqua, Sodium Levulinate, Sodium Anisate. CAS No. 56-81-5, 7732-18-5, 19856-23-6, 536-45-8. Pack Sizes: 100g, 500g, 1Kg, 5Kg, 20Kg, and above upon request. Product ID: RMPVAC. EINECS: 200-289-5, 231-791-2, 243-378-4, 208-634-1. | Worldwide |
| Plantaserv D | Benefits: Antimicrobial, skin conditioning, viscosity modifying. Applications: Odour Mask, Nature-identical preservative system, skin conditioning (hydrating). Origin: This blend contains nature-identical chemical components that are derived from a range of sources. The plant derived equivalent is Plantaserv C. Solubility: Water Soluble. Heat Stability: Relatively good can be added into your product at temperatures up to 80C. pH range: 4.5-5.5 is ideal but we have had success with products that have pH ranges slightly outside of this (3-6). Always be sure to run Preservative Efficacy Testing before settling on your formulation. Use Level: 3-4%. Do not exceed 4% in your formulation. Group: Preservatives. Alternative Names: Glycerin, Aqua, Levulinic Acid, Sodium Hydroxide, p-Anisic Acid. CAS No. 56-81-5,7732-18-5,123-76-2,1310-73-2,100-09-4. Pack Sizes: 100g, 500g, 1Kg, 5Kg, 20Kg, and above upon request. Product ID: RMPVADERMASO. EINECS: 200-289-5,231-791-2,204-649-2,215-185-5,202-818-5. | Worldwide |
| Portulaca - Liquid Extract [Glycerine Based] | Botanical name: Portulaca Oleracea. This liquid, typically a light yellow colour, usually contains a slight odour. Portulaca Extract is developed as a basic ingredient for cosmetics (cleansers, lotions etc), toiletries (shower gels, shampoos etc) and pharmaceuticals (acne treatment etc). Main Effects: Anti-inflammatory. Anti-irritation. Anti- allergy. Hence, making it a prime raw material for assisting in the treatment of burns, skin sores, irritations, insect bites, eczema etc. An extremely effective ingredient in acne treatments. It is also rich in Omega-3 fatty acid which makes it great on dehydrated skin. Group: Extracts. Alternative Names: Glycerin, Aqua, Portulaca Oleracea Extract. CAS No. 56-81-5, 7732-18-5, 90083-07-1. Pack Sizes: 17g, 100g, 500g, 1Kg, 5Kg, 20Kg, and above upon request. Product ID: EXTRPORT. EINECS: 200-289-5, 231-791-2, 290-201-1. | Worldwide |
| Sodium Cocoyl Isethionate | Form: Powder/Flake. Sodium Cocoyl Isethionate is an anionic surfactant derived from coconut fatty acid and sustainable palm that are used in many cosmetic and personal care products. In particular, Sodium Cocoyl Isethionate is used in the preparation of skin cleansing products such as soaps and washes as well as in shampoos and other hair cleansing products. By helping water to mix with oil and dirt, this surfactant is great at rinsing dirt away from the skin and hair leaving both feeling fresh and clean. Activity Level: Minimum of 85% surfactant solids with up to 15% free fatty acids and some residual water. Material Origin: A reaction between Coconut Fatty Acid and Sodium Isethionate. Sodium Isethinonate is created via a reaction between Sodium Hydroxide (lye), Sodium Bisulfide and Ethylene Oxide.It is made from sustainable palm oil. Group: Surfactants. Alternative Names: Sodium Cocoyl Isethionate, Coconut Acid, Sodium Isethionate, Aqua. CAS No. 61789-32-0, 61788-47-4,1562-00-1,7732-18-5. Pack Sizes: 100g, 500g, 1Kg, 5Kg, 20Kg, and above upon request. Product ID: RMASSODICOCOISCT. EINECS: 263-052-5, 262-978-7,216-343-6,231-791-2. | Worldwide |
| Sodium PCA 50% | Origin: Derived from Amino Acids which are sourced from sugar and modified using biotechnology. Activity: 50%. Solubility: Water soluble. Heat Stability: Good - can be added into the water phase prior to heating but avoid temperatures over 75C. Use Levels: 1-3%. Group: Active ingredients. Alternative Names: Sodium PCA, Aqua. CAS No. 28874-51-3, 7732-18-5. Pack Sizes: 100g, 500g, 1Kg, 5Kg, 20Kg, and above upon request. Product ID: RMAASODIPCA50. EINECS: 249-277-1, 231-791-2. | Worldwide |
| Surfactant AN Base | INCI: Aqua, Caprylyl/ Capryl Glucoside, Cocamidopropyl Betaine, Sodium Lauroamphoacetate, Sodium Chloride. Directions for use: This surfactant blend has been created as the cleansing base for your shampoos, body washes and facial wash products. It has been designed to be diluted with water, floral water or hydrosol at a rate of between 10-50% depending on the strength of cleansing you require. Formulations can also be customised with essential oils, extracts and actives, all of which should be tested in the base to make sure they are compatible. Activity Level: 45%. Group: Surfactants. Alternative Names: Aqua, Caprylyl/Capryl Glucoside, Cocamidopropyl Betaine, Sodium Lauroamphoacetate, Sodium Chloride, Sodium Benzoate. CAS No. 7732-18-5, 68515-73-1, 61789-40-0, 66161-62-4,7647-14-5,532-32-1. Pack Sizes: 100ml, 500g, 1Kg, 5Kg, 20Kg, and above upon request. Product ID: RMASCAPRGLUC. EINECS: 231-791-2, 500-220-1, 263-058-8, 266-197-2,231-598-3,208-534-8. | Worldwide |
| Yellow Australian Clay | Yellow Australian Clay is great for gently exfoliating & cleansing your skin, toning & strengthening connective tissues, stimulating blood circulation, drawing out toxins & superfluous fat, and hydrating, nourishing & feeding your skin, without leaving it feeling dry or tight. When using yellow clay add purified water or floral water, mix into a paste and apply to the face or body. Allow to dry, rinse it off, spray with floral water or toner, and use your favourite moisturiser to finish. Group: Clay. Alternative Names: Montmorillonite, Aqua, Quartz, Titanium Dioxide. CAS No. 1318-93-0, 7732-18-5, 14808-60-7, 13463-67-7. Pack Sizes: 100g, 500g, 1Kg, 5Kg, 20Kg, and above upon request. Product ID: CLAYYELLAUS. EINECS: 215-288-5, 231-791-2, 238-878-4, 236-675-5. | Worldwide |
Our database is helping our users find suppliers everyday.
