Find where to buy products from suppliers in NZ, including: distributors, manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Modified vinyl acid etch primer. A high performance two component primer. It contains rust inhibiting pigments and phosphoric acid for etching of ferrous and non-ferrous metals. Suitable substrates include degreased iron, aluminium, bronze, copper, galvanised iron, steel and stainless steel. It is a fast air dry, anti-corrosive primer which exhibits good fresh water immersion properties, minimum burn back characteristics from welds, and is widely used as a adhesion promoting primer for plates or structural steel. 2K Etch Primer is therefore ideal for preparation in trailers, boats, tractors, cars and metal construction components. Categories: Automotive Coatings, Primers, Paints.
Auckland, Hamilton, Wellington, South Island
AE12 Etch Primer - 875
AE12 Etch Primer is a high performance, one-component etch primer with superior anticorrosive properties. It contains rust inhibiting pigments for corrosion protection and phosphoric acid for etching of ferrous and non-ferrous metals. Suitable for application on degreased iron, aluminium, bronze, copper, galvanised steel, steel & stainless steel. Categories: Metal Primers, Paints & Coatings
Auckland, Hamilton, Wellington, South Island
Protective Etch Primer - 875
Modified vinyl acid etch anticorrosive primer. Protective Etch Primer is a high performance one component primer. It contains rust inhibiting pigments and phosphoric acid for corrosion protection and etching of ferrous and non-ferrous metals. Suitable substrates for Protective Etch Primer include degreased iron, aluminium, bronze, copper, galvanised iron, steel and stainless steel. Ideal for preparation on trailers, boats, tractors, cars and metal construction components. Categories: Metal Primers, Paints & Coatings
UNIETCH 2 PACK YELLOW - Low Solids Adhesion Promoting Etch Primer Two component vinyl butyrate etch primer modified with phenolic resin. Pigmented with Zinc Tetroxy Chromate it imparts a smooth semi transparent wash finish , which provides outstanding adhesion to even the most difficult substrates. Typical Uses: Galvanised Priming, Stainless Steel Priming, Aluminium Priming, Chrome Priming, Tempered Steel Priming, Tool Steel Priming Work, Zintec Priming, Propeller Coating, Alloy Casting, Aluminium Hulls Categories: Primers, Paint Manufacturers, Coatings.
Auckland, Palmerston North, Christchurch
UNIETCH - Single Pack Etch Primer
UNIETCH - Single Pack Etch Primer Single pack etch coating for direct application to metal surfaces. It is a one coat finish imparting a smooth satin sheen which provides fusion like adhesion to mild steel surfaces. Typical Uses: As a pre-treatment, blast primer,, or holding primer on: Aluminium metal spray, Aluminium sheet and extrusions, Copper and its alloys, Galvanised steel. Categories: Primers, Paint Manufacturers, Coatings.
Auckland, Palmerston North, Christchurch
Corrodex Heavy Duty Anti-Corrosive Paint System - 973
Protective Paint’s newest product range. Easy 3 step system to prepare, prime & topcoat metal surfaces. For use on iron, steel, aluminium, copper, bronze, brass, galvanised steel and stainless steel. Full range includes: Degreaser, Rust Inhibiting Oil, Zinc Rich Cold Galv, Rust Inhibiting Primer, Etch Primer, Galvanised Iron Primer, Gloss Enamel Top Coat and Special Thinner. Available in convenient 250ml, 500ml, 1L and 300ml Aerosol cans. Categories: Corodex Metal Primers, Paints & Coatings
Auckland, Hamilton, Wellington, South Island
MAC Spraygloss Surface Primers & Undercoats, A complete range of surface preparation paints for any application, MAC Spraygloss Anti-Rust Primer, Specially formulated to inhibit oxidation on steel surfaces, Ensure surface is free of dust and grease, then apply one or two coats, allowing 24 hours before applying the top coat, Available in red oxide and grey oxide. Spray Paints.
MAC Spraygloss Satin-Etch Primer, An etching primer for use on smooth surfaces where normal undercoat adhesion poses a problem, Allow 30 minutes between coats, and 2 hours before final sanding, Available in black, MAC Spraygloss Primer / Undercoat, Ensure surface is free of dust and grease, then apply one or two coats, allowing 30 minutes between each coat, and two hours before final sanding. Categories: Aerosols, Spray Paint Primer, Spray Paint Undercoat
Auckland
Would you like to list your products on NZ Chemical Suppliers?
Our database is helping our users find suppliers everyday.