Find where to buy products from suppliers in NZ, including: distributors, manufacturers, bulk supplies and wholesalers of raw ingredients & finished goods.
Search for products or services, then visit the suppliers website for prices, SDS or more information. You can also view suppliers in Australia, UK or the USA.
| Product | Description | |
|---|---|---|
| Temperature Probe | The HI7662 is a stainless steel temperature probe with a 1 m cable length that allows for temperature compensated measurements on compatible Hanna meters. AISI 316 stainless steel. NTC thermistor. Wide measurement range. Categories: Laboratory The Hanna Range, Accessories and Spare Parts, Temperature Testers. Brand Hanna Instruments. SKU HA-HI7662. ID 27887 |  Medical & Lab Supplies |
| Four ring Conductivity probe with internal temperature sensor - HI76302W | 4-ring interchangeable probe with built-in temperature sensor, DIN connector, for use with HI8733, HI9033, HI9034 & HI87314, 1 m (3.3') cable. Categories: Laboratory The Hanna Range, Multiparameter Accessories. Brand Hanna Instruments. SKU HA-HI76302W. ID 28153 | Medical & Lab Supplies |
| Replacement Temperature probe for portable meter with phono connector - HA-HI7669/2W | Replacement Temperature probe for portable meter with phono connector. Categories: Laboratory The Hanna Range, Accessories and Spare Parts. Brand Hanna Instruments. SKU HA-HI7669.2W. ID 27889 | Medical & Lab Supplies |
| 4-Wire Pt100 Thermometer - HI955501 | Autoranging Economical Missing probe indicator Optional protective boot (pictured). Categories: Laboratory The Hanna Range, Temperature Portables. Brand Hanna Instruments. SKU HA-HI955501. ID 28077 | Medical & Lab Supplies |
| Air and Gas Pt100 Probe - HI768L | The HI768L is an air and liquid Pt100 probe designed for use with one of Hanna's Pt100 thermometers. A cable extends 1 m (3.3') from the handle to the meter connection. The rounded tip of the probe allows users to obtain highly accurate temperature readings of air and liquid samples. FEATURES: Measures up to 350°C (622°F) Pt100 sensor AISI 316 stainless steel. Categories: Laboratory The Hanna Range, Temperature Probes. Brand Hanna Instruments. SKU HA-HI768L. ID 28001 | Medical & Lab Supplies |
| Autoranging Benchtop EC/TDS/Salinity Meter with ATC - HI2300 | The HI2300 is an auto ranging EC/TDS/Salinity and temperature benchtop meter. The meter utilizes a four-ring potentiometric conductivity probe with platinum sensors to offer versatility over typical amperometric designs. Categories: Laboratory The Hanna Range, Ec Metes (Electrical Conductivity Meter) Benchtop Ec Metes (Electrical Conductivity Meter). Brand Hanna Instruments. SKU HA-HI2300-02. ID 28337 | Medical & Lab Supplies |
| Benchtop pH Meter with 0.01 pH Resolution - HI2210 | The HI2210 is a basic, affordable pH benchtop meter that features automatic calibration to 1 or 2 points with a choice of 5 pre-programmed buffers. All readings are automatically compensated for temperature variations from the supplied thermistor probe. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, Benchtop pH Meters. Brand Hanna Instruments. SKU HA-HI2210. ID 28387 | Medical & Lab Supplies |
| Benchtop pH/mV Meter with 0.01 Resolution - HI2211 | The HI2211 is a basic, affordable pH/mV benchtop meter that features automatic calibration to 1 or 2 points with a choice of 5 pre-programmed buffers. All readings are automatically compensated for temperature variations from the supplied thermistor probe The meter has a large, easy-to-read LCD that displays pH or mV and temperature simultaneously. The HI2211 is supplied complete with a pH electrodes, temperature probe, calibration buffers, reference refill electrolyte, cleaning solutions, and a probe holder. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, Benchtop pH Meters. Brand Hanna Instruments. SKU HA-HI2211-02. ID 28389 | Medical & Lab Supplies |
| Checktemp® 1 Digital Thermometer - HI98509 | The HI98509 Checktemp 1 is a high-accuracy thermometer with a 1 m (3.3') flexible, silicone cable connecting the meter and the stainless steel probe. The sharp-tip penetration probe easily lances semi-solid products such as fruits, vegetables, and cheeses. This probe can also handle liquid, air and measurements in frozen materials. The probe incorporates an NTC thermistor sensor to measure the temperature. Categories: Laboratory The Hanna Range, Temperature Testers. Brand Hanna Instruments. SKU HA-HI98509. ID 27743 | Medical & Lab Supplies |
| Checktemp®4 Celsius Folding Thermometer - HI151-00 | The folding Checktemp 4 provides practical temperature measurement for the food service industry. PRODUCT HIGHLIGHTS: ±0.3°C accuracy CAL CHECK Stainless steel folding probe with penetration tip Enables angled measurement Ergonomic Auto shut-off. Categories: Laboratory The Hanna Range, Temperature Testers. Brand Hanna Instruments. SKU HA-HI151-00. ID 27845 | Medical & Lab Supplies |
| Checktemp® Digital Thermometer - HI98501 | The HI 98501 Checktemp is a digital thermometer with stainless steel penetration probe. It delivers high accuracy temperature measurements over a wide temperature range without worrying about breakage or condensation. FEATURES: CAL Check °C/°F readout IP 65 water resistant protection. Categories: Laboratory The Hanna Range, Temperature Testers. Brand Hanna Instruments. SKU HA-HI98501. ID 27739 | Medical & Lab Supplies |
| Checktemp® Dip Digital Thermometer - HI98539 | The Checktemp Dip Digital Thermometer - HI98539 is a high-accuracy thermometer connected to a weighted, stainless steel probe by a 3 m (9.9') flexible, silicone cable. The probe incorporates an NTC thermistor sensor, providing an extremely accurate temperature measurement that can satisfy your HACCP requirements. Categories: Laboratory The Hanna Range, Temperature Portables. Brand Hanna Instruments. SKU HA-HI98539. ID 32100 | Medical & Lab Supplies |
| Digital EC/Temperature Electrode (For the Edge Meter) - HI763100 | The HI 763100 is a digital conductivity electrode with a built in temperature sensor. Compared to the amperometric design of other conductivity probes, the HI 763100 is potentiometric probe with platinum sensors which allows for the possibility to measure high or low conductivity ranges using one probe. This electrode features an integrated microchip which stores calibration data, electrode type, and serial number. The HI 763100 is designed for use with Hanna's edge pH/EC/DO meter. Categories: Laboratory The Hanna Range, Ec Metes (Electrical Conductivity Meter) Ec Electrodes. Brand Hanna Instruments. SKU HA-HI763100. ID 28207 | Medical & Lab Supplies |
| Digital Glass Body ORP Electrode for General Purpose - HI36180 | The HI36180 is a glass body, double junction, refillable ORP electrode (oxidation-reduction potential) with a built-in temperature sensor for temperature compensated measurements. This electrode has a single ceramic junction and the ORP sensing pin is made with platinum. The HI36180 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. This design consideration is ideal for laboratories and general purpose ORP measurements. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, pH Electrodes. Brand Hanna Instruments. SKU HA-HI36180. ID 28093 | Medical & Lab Supplies |
| Digital Glass Body pH Electrode for General Purpose - HI11310 | The HI11310 is a glass body refillable double junction pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. The HI11310 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features a single ceramic junction and the spherical pH sensing portion is made with high temperature glass. This design consideration is ideal for general purpose laboratory use. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, pH Electrodes Digital. Brand Hanna Instruments. SKU HA-HI11310. ID 28027 | Medical & Lab Supplies |
| Digital Glass Body pH Electrode for Hydrocarbons and Solvents - HI10430 | The HI10430 is a glass body, refillable, double junction pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. Within the probe there is an integrated microchip that stores calibration data, electrode type, and serial number, which allows for changing of sensors without having to recalibrate. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, pH Electrodes Digital. Brand Hanna Instruments. SKU HA-HI10430. ID 28143 | Medical & Lab Supplies |
| Digital Glass Body pH Electrode for Semi-Solids and Emulsions - HI10530 | The HI10530 is a digital glass body, refillable, double junction pH electrode that has a built-in temperature sensor. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. This design consideration is ideal for emulsions, fats and creams, soil and semi-solid samples, low conductivity solutions, and for measuring samples at cold temperatures. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, pH Electrodes Digital. Brand Hanna Instruments. SKU HA-HI10530. ID 28117 | Medical & Lab Supplies |
| Digital PEI Body pH Electrode for Field Applications - HI12300 | The HI12300 is a plastic body, double junction, gel filled pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, pH Electrodes Digital. Brand Hanna Instruments. SKU HA-HI12300. ID 27963 | Medical & Lab Supplies |
| Digital PVDF Body Foodcare pH Electrode for Dairy Products - FC2020 | The FC2020 is a digital PVDF body, gel filled pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. This design consideration is ideal for pH measurements in samples such as milk, yogurt, cheese, and other products in the dairy industry. The recommended operating temperature range is from 0 to 60°C. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, pH Electrodes Foodcare. Brand Hanna Instruments. SKU HA-FC2020. ID 28113 | Medical & Lab Supplies |
| Digital PVDF Body Foodcare pH Electrode for Meat Products - FC2320 | The FC2320 is a digital PVDF body, gel filled pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. This design consideration is ideal for pH measurements in samples such as meat and semi-frozen food samples. The recommended operating temperature range is from 0 to 60°C. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, pH Electrodes Foodcare. Brand Hanna Instruments. SKU HA-FC2320. ID 28169 | Medical & Lab Supplies |
| Dual Channel K-Type Thermocouple Thermometer - HI935002 | The Dual Channel K-Type Thermocouple Thermometer - HI935002 is a digital, waterproof thermometer. This meter offers high accuracy temperature measurements using a wide variety of interchangeable probes for the two available input channels. Categories: Laboratory The Hanna Range, Temperature Portables. Brand Hanna Instruments. SKU HA-HI935002. ID 32098 | Medical & Lab Supplies |
| EC and Resistivity Portable Meter - HI87314 | The HI87314 is a durable, portable EC and resistivity meter designed for use in applications such as manufacturing and quality control. It is supplied with a four-ring conductivity probe to allow for four ranges of EC measurement and one range of resistivity measurement The temperature compensation coefficient (β Beta) is adjustable from 0 to 2.5%/°C for conductivity and from 2 to 7%/°C for resistivity. All readings are automatically adjusted for temperature, assuring users of consistent and accurate measurements. Categories: Laboratory, Portable Ec Metes (Electrical Conductivity Meter). Brand Hanna Instruments. SKU HA-HI87314. ID 28251 | Medical & Lab Supplies |
| Flat Tip pH Electrode for Skin and Surfaces with BNC Connector - HI1413B | The HI1413B is a glass body, single reference junction pH electrode made with low temperature glass and a BNC connector. This electrode has a unique open junction design in which there is a viscolene (hard gel) electrolyte layer that is free of silver chloride (AgCl) between the sample to be measured and the internal reference cell. The open junction design resists clogging and the probe's flat tip makes it ideal for pH measurements on surfaces such as skin, leather, agar plates, and paper. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, pH Electrodes. Brand Hanna Instruments. SKU HA-HI1413B. ID 28021 | Medical & Lab Supplies |
| General Purpose Extended Length K-Type Thermocouple Probe with Handle - HI766E2 | The HI766E2 is an extended length general purpose, penetration K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A cable extends 1 m (3.3') from the handle to the thermocouple connector with the meter. The extended length and round, pointed tip of the probe allows users to obtain highly accurate temperature readings of a wide variety of liquid, air, and gas samples. Categories: Laboratory The Hanna Range, Temperature Probes. Brand Hanna Instruments. SKU HA-HI766E2. ID 27855 | Medical & Lab Supplies |
| Gro line Hydroponic Waterproof Portable pH/EC/TDS/Temperature Meter - HI9814 | The HI9814 is a slim, lightweight, and waterproof portable meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature with a single amplified probe. The meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI9814 has advanced features including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm). Categories: Laboratory The Hanna Range, Multiparameter Meters. Brand Hanna Instruments. SKU HA-HI9814. ID 28159 | Medical & Lab Supplies |
| Heavy Duty K-Type Thermocouple Thermometer - HI9063 | The HI9063 is a Heavy Duty Portable K-Type Thermocouple Thermometer. This meter is housed in a rugged waterproof casing allowing to be used in harsh conditions including industrial environments. The HI9063 uses optional K-Type Thermocouple probes to cover a wide temperature range from -50.0 to 1350oC (-58.0 to 2462oF). Categories: Laboratory The Hanna Range, Temperature Portables. Brand Hanna Instruments. SKU HA-HI9063. ID 28151 | Medical & Lab Supplies |
| HI1288 pH/EC/TDS Multiparameter Probe | The HI1288 is a 3-in-1 pre-amplified multiparameter probe that measures pH, EC/TDS, and temperature within a single polypropylene body. A built-in temperature sensor ensures that both pH and EC/TDS readings are compensated for temperature variations in both standards and samples. The design consideration for the HI1288 is ideal for measuring the pH, EC/TDS, and temperature in greenhouses, hydroponics, environmental monitoring, water treatment, wastewater treatment and boilers and cooling towers. Categories: Laboratory The Hanna Range, Multiparameter Probes. Brand Hanna Instruments. SKU HA-HI1288. ID 28015 | Medical & Lab Supplies |
| HI2221 Calibration Check pH Bench Meter | The HI2221 is an affordable pH/mV benchtop meter that features automatic pH calibration up to five-points that can be performed using seven standard buffers. All pH measurements are compensated for temperature effect automatically with the supplied HI7662 temperature probe. The HI2221 can also measure oxidation reduction potential (ORP) in the mV range using ORP electrode (oxidation-reduction potential)s. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, Benchtop pH Meters. Brand Hanna Instruments. SKU HA-HI2221-02. ID 28273 | Medical & Lab Supplies |
| HI710007 Shockproof Rubber Boot (Blue) | HI710007 is a blue shockproof rubber boot designed for select pH, multipara meter, and temperature meters. The durable rubber casing ensures users have a secure grip on their instrument when using it in the field, factory, or production room floor. The HI710007 rubber boot prevents damage in the case of accidental impact and is able to withstand harsh environmental conditions. This protective boot features an opening for the face of the meter as well as at the bottom for easy access to probe connections. HI710007 is designed to fit Hanna meters that measure 145 x 80 x 36 mm (5.7 x 3.1 x 1.4"). Categories: Laboratory The Hanna Range, Accessories and Spare Parts. Brand Hanna Instruments. SKU HA-HI710007. ID 27643 | Medical & Lab Supplies |
| HI710023 Shockproof Rubber Boot (Orange) | HI710023 is an orange shockproof rubber boot designed for select pH, multiparameter, and temperature meters. The durable rubber casing ensures users have a secure grip on their instrument when using it in the field, factory, or production room floor. The HI710023 rubber boot prevents damage in the case of accidental impact and is able to withstand harsh environmental conditions. This protective boot features an opening for the face of the meter as well as at the bottom for easy access to probe connections. HI710023 is designed to fit Hanna meters that measure 152 x 58 x 30 mm (6.0 x 2.3 x 1.2"). Categories: Laboratory The Hanna Range, Accessories and Spare Parts. Brand Hanna Instruments. SKU HA-HI710023. ID 27645 | Medical & Lab Supplies |
| HI710024 Shockproof Rubber Boot (Blue) | HI710024 is a blue shockproof rubber boot designed for select pH, multiparameter, and temperature meters. The durable rubber casing ensures users have a secure grip on their instrument when using it in the field, factory, or production room floor. The HI710024 rubber boot prevents damage in the case of accidental impact and is able to withstand harsh environmental conditions. This protective boot features an opening for the face of the meter as well as at the bottom for easy access to probe connections. HI710024 is designed to fit Hanna meters that measure 152 x 58 x 30 mm (6.0 x 2.3 x 1.2"). Categories: Laboratory The Hanna Range, Accessories and Spare Parts. Brand Hanna Instruments. SKU HA-HI710024. ID 27647 | Medical & Lab Supplies |
| HI7634 EC/TDS Probe for Mini Controller (Low Range) | The HI7634-00 is a two-pole amperometric EC/TDS probe for panel mounted mini controllers that measure in the low range (µS/cm and ppm). This probe has a built-in temperature sensor for Automatic Temperature Compensation and a ½" male NPT threaded connection for insertion mounting. The HI7634-00 probe provides a rapid response and high accuracy EC or TDS measurement. Categories: Laboratory The Hanna Range, Minicontrollers Minicontroller Probes. Brand Hanna Instruments. SKU HA-HI7634-00. ID 27797 | Medical & Lab Supplies |
| HI839800 COD Test Tube Heater | The HI839800 COD Test Tube Heater is an easy to use thermoreactor constructed of durable materials. The aluminum block incorporates a 25 vial capacity and a well for a reference temperature probe. Its well-marked user interface provides intuitive operation, equipped with two arrows to set the built-in timer and a temperature button with two predefined temperature settings: 150ºC and 105ºC. Additional features include status indicator lights, a thermal fuse to prevent overheating, and continuous LCD display. Categories: Laboratory The Hanna Range, Chemical Oxygen Demand Cod. Brand Hanna Instruments. SKU HA-HI839800-02. ID 28319 | Medical & Lab Supplies |
| HI93530 0.1° Resolution K-Type Thermocouple Thermometer | The 0.1° Resolution K-Type Thermocouple Thermometer - HI93530 is a digital, waterproof thermometer. This meter offers high accuracy temperature measurements using a wide variety of interchangeable K-type probes. All readings are displayed on the easy to read LCD, along with the temperature units and a battery indicator upon startup. Categories: Laboratory The Hanna Range, Temperature Portables. Brand Hanna Instruments. SKU HA-HI93530. ID 28013 | Medical & Lab Supplies |
| HI9829 Multiparameter pH/ISE/EC/DO/Turbidity Waterproof Meter with GPS option | The HI9829 is a waterproof portable logging multiparameter meter that monitors up to 14 different water quality parameters. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, dissolved oxygen, turbidity, ammonium, chloride, nitrate, and temperature. The complete system is simple to setup and easy to use. The HI9829 is highly customizable and supplied with all necessary accessories, packaged in a durable carrying case. Categories: Laboratory The Hanna Range, Multiparameter Meters. Brand Hanna Instruments. SKU HA-HI9829-02. ID 28353 | Medical & Lab Supplies |
| HI991300 Portable pH/EC/TDS/Temperature Meter (Low Range) | The HI991300 is a slim, lightweight, and waterproof portable meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature with a single amplified probe. The meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI991300 has advanced features including a selectable EC to TDS conversion factor (0.45 - 450 ppm and 1.0 - 1000 ppm). Categories: Laboratory The Hanna Range, Multiparameter Meters. Brand Hanna Instruments. SKU HA-HI991300. ID 28253 | Medical & Lab Supplies |
| HI991301 Portable pH/EC/TDS/Temperature Meter (High Range) | The HI991301 is designed to measure pH, conductivity (EC), total dissolved solids (TDS), and temperature with a single probe. From setup to calibration all operations are performed with just two buttons. The meter is waterproof and rated for IP 67 conditions. Categories: Laboratory The Hanna Range, Multiparameter Meters. Brand Hanna Instruments. SKU HA-HI991301. ID 28255 | Medical & Lab Supplies |
| MULTIMETER - DIGITAL DT-838 (* Note: Model specifications may vary) | Our most popular digital multimeter. It is being used to replace analogue bench meters for measuring DC volts and amps. Switch to the 20 volt DC range and voltages can be measured from minus 20 to plus 20 volts accurate to two decimal places (no problem if meter is connected into circuit with incorrect polarity). Likewise switch to 10 amps DC and current can be measured from minus 10 to plus 10 amps accurate to two decimal places. A temperature probe included. These two DC ranges make it unnecessary to have A number of analogue bench meters to cover the measurement of low and high voltages and currents normally encountered with experimental work. - Note. Code: ULS2531. Suppliers to schools & laboratories of science equipment & laboratory grade chemicals. | .jpg) Science & Lab Supplies NZ |
| Multiparameter (pH/ISE/EC/DO/Turbidity) Probe for HI9829 - HI7609829 | The HI7609829 is a multiparameter pH/ISE/EC/DO/ Turbidity/ Temperature probe for use with the HI9829 portable meter. Sensors are automatically recognized by the probe and meter when connected. Sensor replacement is quick and easy with field replaceable, screw type connectors that are colour-coded for easy sensor identification. The probe features a multistrand multiconductor shielded cable with 4m length. It's rugged, waterproof design makes it ideal for field use. Categories: Laboratory The Hanna Range, Multiparameter Accessories. Brand Hanna Instruments. SKU HA-HI7609829.4. ID 28335 | Medical & Lab Supplies |
| Multiparameter pH/ORP /DO/ Pressure/Temperature Waterproof Meter - HI98196 | The HI98196 is a waterproof portable logging multiparameter meter that monitors up to 7 different water quality parameters including 5 measured and 2 calculated. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, dissolved oxygen, and temperature. The probe transmits readings digitally to the meter, where data points can be displayed and logged. The use of digital communication allows for noise free transfer of data for up to 100 meters in cable length. The complete system is simple to setup and easy to use. Categories: Laboratory The Hanna Range, Multiparameter Meters. Brand Hanna Instruments. SKU HA-HI98196. ID 28341 | Medical & Lab Supplies |
| Multiparameter pH/ORP/EC/TDS/ Salinity/ DO/Pressure/ Temperature Waterproof Meter - HI98194 | The HI98194 is a waterproof portable logging multiparameter meter that monitors up to 12 different water quality parameters including 6 measured and 6 calculated. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, dissolved oxygen, and temperature. The probe transmits readings digitally to the meter, where data points can be displayed and logged. The HI98194 is supplied with all necessary accessories and packaged in a durable carrying case. Categories: Laboratory The Hanna Range, Multiparameter Meters. Brand Hanna Instruments. SKU HA-HI98194. ID 28351 | Medical & Lab Supplies |
| Multi-range EC Meter - HI8733 | The HI8733 is a durable, portable EC meter designed for use in areas of production and quality control. It is supplied with a four-ring conductivity probe to allow for four ranges of measurement. Conductivity readings are adjusted with Automatic Temperature Compensation (ATC), assuring users of consistent and accurate measurements. Categories: Laboratory, Portable Ec Metes (Electrical Conductivity Meter). Brand Hanna Instruments. SKU HA-HI8733. ID 28243 | Medical & Lab Supplies |
| Multi-Range EC Meter with Manual Temperature Compensation - HI8633 | The HI8633 is a durable, portable EC meter designed for use in areas of production and quality control. It is supplied with a four-ring conductivity probe to allow for four ranges of measurement. Conductivity readings are adjusted with Automatic Temperature Compensation (ATC), assuring users of consistent and accurate measurements. Categories: Laboratory, Portable Ec Metes (Electrical Conductivity Meter). Brand Hanna Instruments. SKU HA-HI8633. ID 28199 | Medical & Lab Supplies |
| ORP/Temperature Tester - HI98120 | The HI98120 is a waterproof ORP and temperature handheld meter. The housing of this tester is completely sealed to protect against the intrusion of water and is also designed to float if accidentally dropped into a body of water. The HI73120 replaceable ORP electrode (oxidation-reduction potential) is a cartridge design with the stainless steel round connector. With this type of design there are no pins that can bend or break during replacement. The ORP electrode (oxidation-reduction potential) also has an extendable cloth junction. This type of junction allows for the renewal of the junction by simply pulling out 3 mm (1/8") to clear any clogging which improves measurement response time and stability. The exposed stainless steel temperature probe on this meter facilitates a faster, accurate temperature measurement. Categories: Laboratory The Hanna Range, Temperature Testers. Brand Hanna Instruments. SKU HA-HI98120. ID 28009 | Medical & Lab Supplies |
| Penetration Probe, White- HI765PW | General purpose, penetration probe with coloured handle and 1 m (3.3') cable All probes are pre-calibrated with a maximum error of 0.2°C (±0.4°F). The HI 765 series can be identified by the white cap on the top of the handle, and offers a wide range of probes for measuring liquids, air & gasses, and for penetration in semisolids. Categories: Laboratory The Hanna Range, Temperature Probes. Brand Hanna Instruments. SKU HA-HI765PW. ID 27871 | Medical & Lab Supplies |
| pHep®4 pH/Temperature Tester - HI98127 | Hanna's pHep 4 waterproof tester is an advanced meter has many features that can be found in portable and benchtop meters. This ergonomic meter measures from -2.0 to 16.0 pH with an accuracy of ±0.1 pH. pHep 4 features automatic one or two-point calibration and automatic temperature compensation. The large multi level LCD display shows both pH and temperature readings simultaneously, while a stability indicator is displayed to alert the user when a stable reading has been obtained. The pHep 4 tester also features a replaceable pH probe that has a unique extendable cloth junction to clear any clogging that occurs. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, Testers pH. Brand Hanna Instruments. SKU HA-HI98127. ID 27923 | Medical & Lab Supplies |
| pHep®5 pH/Temperature Tester - HI98128 | Hanna's pHep 5 waterproof tester is an advanced pH meter that has many features found in more expensive portable and benchtop meters. This ergonomic meter measures from -2.00 to 16.00 pH with an accuracy of ±0.05 pH. pHep 5 features automatic one or two-point calibration to known buffer, automatic temperature compensation. The large multi level LCD display shows both pH and temperature readings simultaneously, while a stability indicator is displayed to alert the user when a stable reading has been obtained. The pHep 5 tester also features a replaceable pH probe that has a unique extendable cloth junction to clear any clogging that occurs. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, Testers pH. Brand Hanna Instruments. SKU HA-HI98128. ID 27943 | Medical & Lab Supplies |
| pH Meter Portable Separate Probes - HI83141 | HI 83141 is a handheld pH/mV/°C meter designed to be reliable and easy-to-use. HI 83141 uses the HI 1230B pH electrode and HI 7669AW temperature probe using separate connections (both included). Manual calibration is performed at one or two points by adjusting the knobs on the front panel. This instrument is ideal for applications that require a custom calibration point. Manual calibration can be extremely useful in order to achieve better accuracy. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, Portable pH Meters. Brand Hanna Instruments. SKU HA-HI83141. ID 28189 | Medical & Lab Supplies |
| pH / mV / TEMPERATURE METER - DIGITAL | Three instruments in one. Auto calibration, auto temperature compensation, accurate, stable and quick reading. Membrane keyboard to ensure dust and splash resistance. Measures: pH 0-14 Resolution: +/- 0.01 pH accuracy: 0.02pH Temperature Compensation: automatic from 0-100degC. mV: +/- 1999mV ,accuracy 1mV. Temperature: -10 to +100degC, accuracy +/- 0.1 degC. Battery operated for portability, uses 1x standard PP9 9V battery (supplied). pH electrode and temperature probe included. Twin LCD display allows pH and temperature or mV and temperature to be read at the same time. Supplied in plastic carry case with A bottle each of pH4 and pH7 bufffer solution. Code: INS-201. Suppliers to schools & laboratories of science equipment & laboratory grade chemicals. | Science & Lab Supplies NZ |
| PocketLab Voyager Temp. Probe | PocketLab Voyager Temperature Probe. Temperature probe for PocketLab Voyager & Weather, 1m length. Temperature range of -40C to 105C (-20 to 221F). Group: Science equipment. Electroflash provides educational resources for schools and universities, enhancing teaching and learning in Science, Physics, Chemistry, Electronics, and Technology. |  Christchurch, Online |
| Portable Dissolved Oxygen Meter - HI9146 | The HI9146 is a rugged, portable dissolved oxygen (DO) meter designed to provide laboratory precision and accuracy under harsh environmental and industrial conditions. This meter offers many features including automatic calibration, auto-endpoint detection, and compensation for temperature, salinity and altitude. The HI9146 is supplied complete with polarographic probe, PTFE membrane caps, electrolyte fill solution, and rugged carrying case. Categories: Laboratory The Hanna Range, Dissolved Oxygen Meters Portable Do Meters. Brand Hanna Instruments. SKU HA-HI9146-04. ID 28283 | Medical & Lab Supplies |
| Portable High Range EC/TDS Meter - HI99301 | The HI99301 is a rugged, portable EC/TDS and temperature meter housed in a case rated for IP67 conditions. It is supplied with a two-ring conductivity probe to allow for high range EC measurements from 0.00 to 20.00 mS/cm and TDS measurements from 0.00 to 10.00 ppt. All readings are adjusted with Automatic Temperature Compensation (ATC) and users are able to adjust the temperature correction coefficient and TDS factor for accurately compensated measurements. Categories: Laboratory, Portable Ec Metes (Electrical Conductivity Meter). Brand Hanna Instruments. SKU HA-HI99301. ID 28149 | Medical & Lab Supplies |
| Portable pH/mV Meter - HI8424 | The HI8424 is a compact, waterproof, portable pH/mV/temperature meter that is supplied complete with a protective carrying case, PEI plastic body pH electrodes, stainless steel temperature probe, calibration buffer sachets, and cleaning solution sachets. The meter features automatic calibration at one or two points as well as Automatic Temperature Compensation (ATC) when the temperature probe is connected. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, Portable pH Meters. Brand Hanna Instruments. SKU HA-HI8424. ID 75656 | Medical & Lab Supplies |
| Premix Ex Taq (Perfect Real Time) | Premix Ex Taq (Perfect Real Time) is a 2X RT-PCR kit specifically designed for fast and sensitive real-time PCR via either SYBR Green Real-Time PCR (qPCR) or probe-based qPCR assays. SYBR Green I Dye and probes for probe/5' nuclease based assays are not included in this RT-PCR kit. The Premix Ex Taq (Perfect RealTime) kit consists of Takara's high fidelity and high performance TaKaRa Ex Taq Hot Start polymerase and a real-time buffer that ensures superior specificity and increased amplification efficiency during RT-PCR (qPCR). Antibody-mediated hot start technology prevents nonspecific amplification due to mispriming and/or formation of primer-dimers during room temperature reaction assembly. Once the Taq antibody-polymerase complex is denatured during the first cycling step, the Premix Ex Taq polymerase can initiate DNA synthesis. Categories: Laboratory Molecular & Microbiology Reagents, PCR Reagents. Brand Takara Bio. SKU TKRR039A. ID 74850 | Medical & Lab Supplies |
| Professional Portable Cheese pH Meter Kit - HI98165 | The HI98165 is a rugged, waterproof, portable Foodcare pH meter that measures pH and temperature using the specialized FC2423 cheese pH electrode. This professional, waterproof meter complies with IP67 standards. The HI98165 is supplied with all necessary accessories to perform a pH/temperature measurement packaged into a durable thermoformed carrying case that holds the meters, probes and calibration buffers securely in place. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, Portable pH Meters. Brand Hanna Instruments. SKU HA-HI98165. ID 75119 | Medical & Lab Supplies |
| Pure Water Tester - HI98308 | The HI98308 Pure Water tester is a rugged and reliable pocket-sized tester that offers quick and accurate readings. The HI98308 Pure Water tester features graphite electrodes to reduce polarization effects and an exposed temperature probe for fast response when compensating for temperature changes. Manual calibration is performed to a single point. Categories: Laboratory The Hanna Range, Ec Metes (Electrical Conductivity Meter) Testers Ec. Brand Hanna Instruments. SKU HA-HI98308. ID 27853 | Medical & Lab Supplies |
| PVDF Body Foodcare pH Electrode for Dairy Products and Semi-Solid Foods - FC200B | The FC200B is a PVDF body, gel filled, single junction pH electrode with a BNC connector. This probe features an open junction design, a sensing bulb made of low temperature glass, and a food grade plastic body. This design consideration is ideal for pH measurements in the food industry including dairy, dough, ground meats, and other semi-solid food samples. The recommended operating temperature range is from 0 to 50°C. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, pH Electrodes Foodcare. Brand Hanna Instruments. SKU HA-FC200B. ID 28081 | Medical & Lab Supplies |
| PVDF Body Foodcare pH Electrode with BNC Connector for Dairy Products - FC100B | The FC100B is a PVDF body, refillable, double junction pH electrode with a BNC connector. This single ceramic, double junction electrode has a pH indicating probe made of general purpose glass and a food grade plastic body. This design consideration is ideal for pH measurements in the food industry including sauces, juices, dairy products and other liquid or slurry forms of food. The recommended operating temperature range is from 0 to 80°C. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, pH Electrodes Foodcare. Brand Hanna Instruments. SKU HA-FC100B. ID 28023 | Medical & Lab Supplies |
| Tester Cheese pH | Cheese pH Tester is designed for direct measurement. The built-in probe features open junction, low temperature conical glass tip, and food safe PVDF body making it ideal for measuring the pH of almost all types of cheeses and curds. Group: Science equipment. Electroflash provides educational resources for schools and universities, enhancing teaching and learning in Science, Physics, Chemistry, Electronics, and Technology. | Christchurch, Online |
| Thermohygrometer with Dewpoint - HI9565 | HI9565 is a portable Thermohygrometer designed to provide peak performance in harsh environments. Measurements of temperature, relative humidity, and dew point are made easy with the rugged, water-resistant housing of the meter and durable casing of the HI70602 probe. HI9565 features an auto-off function after 20 minutes of inactivity, temperature readings in both Celsius and Fahrenheit, and on-screen messages to direct procedures and indicate potential errors. Categories: Laboratory The Hanna Range, Rh. Brand Hanna Instruments. SKU HA-HI9565. ID 28053 | Medical & Lab Supplies |
| THERMOMETER - DIGITAL CENTIGRADE SCALE | An easy to use, hand held electronic thermometer with A stainless steel probe tip. - Temperature range from 32 to plus 42 degrees Celsius (1 decimal place). - Reads accurate to 1 deg.Celsius. - Two beep sounds for normal and fever temperatures. - Battery life is approximately 2 years or 2500 times.- Dimension: 125mm x 19mmx 11mm. - Weight is approximately 9.8g. Code: HE75-226-01. Suppliers to schools & laboratories of science equipment & laboratory grade chemicals. | Science & Lab Supplies NZ |
| THERMOMETER - DIGITAL PROBE | A robust, easy to use, hand held digital thermometer with A stainless steel probe. - Temperature range from minus 50 to plus 200 degreesCelsius (2 decimal places). - Reads accurate to 1 deg.Celsius. - Fast response - about eight seconds. - Battery life - approximately 5000 hours when used continuously. Code: EDQM7216. Suppliers to schools & laboratories of science equipment & laboratory grade chemicals. | Science & Lab Supplies NZ |
| Titanium Body pH Electrode for Wastewater with DIN Connector - HI1296D | The HI1296D is a titanium body, gel filled, single reference junction pH electrode with a DIN connector. This sensing portion of this electrode is made with general purpose glass. The HI1296D also has an extendable cloth type junction, built-in temperature sensor and an amplifier within a single probe design. This design consideration is ideal for measuring the pH in municipal and industrial wastewater and various field applications. The HI1296D is designed for use with Hanna's HI991001 Portable pH Meter. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, pH Electrodes. Brand Hanna Instruments. SKU HA-HI1296D. ID 28109 | Medical & Lab Supplies |
| T-Shaped Celsius Thermometer (300mm) - HI145-20 | The HI145 is a T-shaped digital thermometer with stainless steel penetration probe developed for HACCP programs. It offers an ergonomic design and delivers high accuracy measurements over a wide temperature range. FEATURES: CAL Check AISI 316 stainless steel probe HACCP compliant. Categories: Laboratory The Hanna Range, Temperature Testers. Brand Hanna Instruments. SKU HA-HI145-20. ID 27863 | Medical & Lab Supplies |
| Waterproof Portable pH/mV Meter with CAL Check - HI9126 | The HI9126 is a rugged, waterproof, portable pH and mV meter. This meter offers many features including CAL Check electrode diagnostics, automatic calibration, automatic shut-off, backlit LCD display, on-screen instructions, and automatic temperature compensation. The HI9126 is supplied complete with meter, PEI plastic body, double junction pH electrodes, and temperature probe packaged in a durable plastic carrying case. Categories: Laboratory The Hanna Range, pH Meters and Electrodes, Portable pH Meters. Brand Hanna Instruments. SKU HA-HI9126. ID 28259 | Medical & Lab Supplies |
| Waterproof Thermistor Thermometer - HI93510 | The Waterproof Thermistor Thermometer - HI93510 is housed in a rugged waterproof casing designed for use in the field as well as the laboratory. The HI93510 offers a wide range of probes for measurement in gases, air, and liquids, as well as surfaces and substances that require penetration for accurate readings. Optional thermistor probes cover a wide temperature range from -50.0 to 150°C (-58.0 to 302°F). Categories: Laboratory The Hanna Range, Temperature Portables. Brand Hanna Instruments. SKU HA-HI93510. ID 28103 | Medical & Lab Supplies |
| Waterproof Thermistor Thermometer - HI93510N | The Waterproof Thermistor Thermometer - HI93510N is housed in a rugged waterproof casing designed for use in the field as well as the laboratory. The HI93510N allows for calibration in an ice bath at 0°C and offers a wide range of probes for measurement in gases, air, and liquids, as well as surfaces and substances that require penetration for accurate readings. Optional thermistor probes cover a wide temperature range from -50.0 to 150°C. Categories: Laboratory The Hanna Range, Temperature Portables. Brand Hanna Instruments. SKU HA-HI93510N. ID 32093 | Medical & Lab Supplies |
| Wire Thermistor Probe (10m) - HI765W | The HI765W is a wire thermistor probe designed for use with a thermistor thermometer. The wire extends 10 m (33') from the probe to the connector with the meter; the HI765W does not incorporate a handle. The flexible wire probe allows users to obtain highly accurate readings of hard to reach surfaces. The HI765 series of thermistor probes is pre-calibrated with a maximum error of ±0.2°C (±0.4°F), so recalibration isn't necessary when probes are interchanged. Categories: Laboratory The Hanna Range, Temperature Probes. Brand Hanna Instruments. SKU HA-HI765W. ID 27847 | Medical & Lab Supplies |
| Wire Thermistor Probe - HI765W1 | The Wire Thermistor Probe - HI765W is designed to measure the temperature of hard to reach surfaces that may be difficult to measure with traditional temperature probes. The response time of a measurement is affected by the position of the sensor relative to the surface being measured. The HI765W wire construction offers an 8-second response for a temperature reading for samples up to 150°C (302°F). Categories: Laboratory The Hanna Range, Temperature Probes. Brand Hanna Instruments. SKU HA-HI765W1. ID 27713 | Medical & Lab Supplies |
| 4-Wire Pt100 Thermometer with Fixed Probe - HI955502 | PRODUCT HIGHLIGHTS: Autoranging Economical Optional protective boot. Categories: Laboratory The Hanna Range, Temperature Portables. Brand Hanna Instruments. SKU HA-HI955502. ID 28155 | Medical & Lab Supplies |
Our database is helping our users find suppliers everyday.
